MAK TURBOL 37
NON ISO VG: 37
These oils have exceptional thermal and oxidation stability. In addition, they are also fortified with anti-rust and anti-oxidant additives.
These oils are recommended in pressure circulation lube oil system in steam / gas / water turbines as prime mover for electricity generation. These are also used for the lubrication of steam turbines used as prime movers in industries. They are used in thelubrication of bearings of rotary / turbo compressors. They are also used to lubricate bearings prone to water contamination where demulsibility becomes a very important parameter for selection of oil.
- Good oxidation & thermal stability
- Provide excellent protection against rusting
- Ability to release entrained air rapidly
- Excellent demulsibility and resistance to foaming
- IS 1012 : 2002
- DIN 51 515 Part 1
- BS 489 : 1983
- GEK 32568A
Our grades meet above specifications for the respective viscosity grades.
|Characteristics||IS 1448||Typical Figures|
|Density at 15° C||P:16||0.8528|
|K.V at 40° C, cSt||P:25||37.3|
|Pour Point, °C||P:10||-18|
|Flash Point, (COC), °C||P:69||240|
|Copper Strip Corrosion Test at 100°C for 3 hrs.||P:15||No corrosion|
a) Sequence I
b) Sequence II
c) Sequence III
|P:67||Nil / Nil
10 / Nil
Nil / Nil
Health and Safety
These oils are not hazardous under normal conditions of use. For further guidance appropriate Material Safety Data Sheet may be referred.