MAK HYDROL P 68
SAE Grade: 68
These are blended from high quality solvent refined mineral oils fortified with extremely shear stable viscosity index improver. Exceptionally high viscosity index of these oils ensure smoother operation of hydraulic transmission systems even under extreme ambient temperature conditions.
TMAK HYDROL P 46 is approved by M/s. TELCO for use in Tata Hitachi Excavators.
MAK HYDROL P 68 is recommended for use in small L&T – Komatsu excavators.
MAK HYDROL P 100 is recommended foruse in large L&T Poclain excavators.
MAK HYDROL P 100 is approved by M/s. Hyderabad Industries Ltd. for use in Demag Excavators.
- MAK HYDROL P 46 : Proprietary grade.
- MAK HYDROL P 68 : L&T- (R-201-032-11) Index A Specification.
- MAK HYDROL P 100 : L&T – (Z-00-032-42) Index G Specification.
- Type C-4 of Allison transmission division of General Motors, USA
- Caterpillar T0-2
|Characteristics||IS 1448||Typical Figures|
|Appearance||—-||Clear brown fluid|
|Density at 15° C||P:16||0.8805|
|K.V at 100° C, cSt||P:25||66.03|
|Pour Point, °C||P:10||-36|
|Flash Point, (COC), °C.||P:69||226|
|Copper Strip Corrosion Test at 100°C for 3 hrs.||P:15||1a|
a) Sequence I
b) Sequence II
c) Sequence III
|P:67||10 / Nil
30 / Nil
20 / Nil
Health and Safety
These oils are not hazardous under normal use conditions. For further guidance appropriate Material Safety Data Sheet can be referred.