MAK FilmBear Oil 46
ISO VG: 46
These oils have been specially formulated from carefully selected, highly solvent refined, high viscosity index, straight mineral base oils.
These oils are recommended for oil film bearings operating at high temperature conditions and with possibility of water ingress into the oil system.
- Possess anti-oxidation, anti-rust and thermal stability properties
- Exhibits outstanding demulsibility
- IPSS : 1-09-001-97
- Our grades meet above specification for the respective viscosity grades
|Characteristics||IS 1448||Typical Figures|
|Appearance||—-||Clear & Bright|
|Density at 15° C||P:16||0.8582|
|K.V at 40° C, cSt||P:25||46.2|
|Pour Point, °C||P:10||-15|
|Flash Point, (COC), °C||P:69||234|
|Copper Strip Corrosion Test at 100°C for 3 hrs.||P:15||1a|
a) Sequence I
b) Sequence II
c) Sequence III
Health and Safety
These oils are not hazardous under normal use conditions. For further guidance appropriate Material Safety Data Sheet can be referred.